Equipment:
- Iron, a protective sheet (e.g. baking paper).
Materials:
- Materials can be found in corresponding repair kits provided by your repair kit manufacturer.
- Only where non-GORE-TEX laminates are used, non-GORE material can be utilized for repair.
- Only GORE-SEAM® tape of the same specification as the main body GORE-SEAM® tape must be used.
- When repairing GORE-TEX or High-Visibility GORE-TEX clothing, it should be ensured that only GORE-TEX laminates that comply with the appropriate norms, must be used.
Follow the manufacturers’ instructions provided within the repair kits. If additional information is needed, please contact the manufacturer.
STEP 1
Make sure that the damaged area to which the repair patch is to be applied is clean and dry.
STEP 2
Cut the repair patch to the appropriate size and round of the corners. The patch should overlap the damaged area by at least 1 cm all around.
Step 3
Put the repair patch onto the damaged area. If possible, apply pressure and heat onto the repair patch with an iron (settings: 3 dots; no steam) for two minutes. Make sure to put a protective sheet (e.g., baking paper) between iron and repair patch.